Domestic electrician in Fleet & Hampshire.
From a tripping fuseboard to extra sockets in the kitchen — clear quotes and tidy work for homes across Fleet, Church Crookham, Farnborough, Aldershot and surrounding Hampshire.
Quick answers
What should I do if my electrics keep tripping?
Don't keep resetting the breaker — a repeated trip means a real fault.
At the consumer unit, identify which breaker has dropped, then unplug everything on that circuit and reset the breaker once. If it holds with nothing plugged in, the fault is in an appliance — plug things back in one by one to find the culprit. If it trips with nothing plugged in, the fault is in the fixed wiring and needs an electrician to trace it.
Can outdoor sockets and garden power be installed safely?
Yes — when installed correctly to current standards.
Outdoor sockets must be IP-rated (weatherproof) and RCD-protected. Any underground supplies should use steel-wire-armoured (SWA) cable buried at a safe depth, or a correctly rated conduit. See outdoor power & garden electrics for outdoor sockets, garden lighting, shed and garden office supplies, and hot tub circuits across Fleet and the surrounding Hampshire area.
Honest home electrical work
Whether it's a quick repair or a planned upgrade, JSC Electrical handles domestic work across Fleet and the surrounding area. You'll get a clear quote up front and the work done by the same person you spoke to on the phone.
Not sure exactly what the problem is? Send photos or a short video by email — most issues can be diagnosed faster that way.
Domestic jobs we cover
- Fault finding & tripping circuits
- Extra sockets, USB sockets & spurs
- Lighting — downlights, LED strips, dimmers, outdoor
- Replacement switches, sockets & light fittings
- Cooker, hob & oven circuits
- Bathroom fans & electric showers
- Outdoor sockets & garden lighting
- Supplies to sheds, garden offices & hot tubs
- Smoke & heat alarm replacements
- Small additions and partial rewires
Symptoms worth a call
If any of these sound familiar, it's worth getting it looked at sooner rather than later.
RCD keeps tripping
Often a single appliance or damaged cable.
Flickering lights
Loose terminations or dimmer/LED mismatch.
Dead sockets
Whole ring dead or one socket out.
Burning smell
Switch off at the main and call — don't ignore.
Old fuseboard
Rewireable fuses, no RCD protection.
Downlights gone out
LED driver failure or fixed dimmer issue.
Shower not heating
Element or supply fault — needs checking.
Smoke alarm chirping
Often beyond replacement age — let's check.
Don't put it off if…
Some issues are minor. Some get worse — and dangerous — fast.
Burning smell or sparks
Switch off at the main and call. Don't keep using the affected circuit.
Repeated tripping
The board is doing its job — but something's wrong. It needs tracing.
Buzzing accessories
A buzzing socket or switch usually means a loose connection — risk of overheating.
Renovation or new circuit
Kitchen, bathroom, extension, EV charger, garden office — plan electrics in early.
No job too small
One socket move, a new light fitting, a faulty switch — small electrical jobs are just as welcome as larger projects.
Do you take on small electrical jobs?
Yes. Single-socket moves, a new light fitting, replacing worn-out switches, fitting a USB socket — all welcome.
Smaller jobs are easier to slot in around larger ones, which often means a quicker turnaround. You'll get a clear price up front, with the call-out cost explained before booking for diagnostic-only visits.
Single socket move
Moving a socket to a more useful spot.
Light fitting swap
Replace an old fitting in the same position.
Add a socket
One new socket where you actually need it.
Switch replacement
Faulty or worn-out switches replaced.
USB socket swap
Existing socket swapped for a USB-equipped one.
PIR / sensor light
Add or replace a motion-detect light.
Ceiling rose change
Replace old roses with chandelier-ready ones.
Outdoor light fix
External light not coming on or flickering.
From first call to job done
Get in touch
Call, email or use the contact form. A photo is helpful.
Quick quote
For most domestic jobs, a written quote can follow within a working day.
Work scheduled
Booked at a time that suits you, with a realistic time estimate.
Sign-off
The relevant certificate is provided where notifiable work is involved.
Common questions
Do you charge for a quote?
Quotes for planned work are free. Diagnostic visits and call-outs are priced clearly on the phone before booking.
Are you insured / qualified?
Insurance and qualification details can be provided on request — just ask when getting in touch.
Can you fit downlights into my kitchen ceiling?
In most cases yes — we'll check the ceiling type, insulation and any fire-rating requirements, then fit fire-rated LED downlights with sensible spacing.
My sockets keep tripping the fuseboard — can you help?
Yes. Fault finding is one of the most common call-outs. We trace the issue methodically and repair on the spot where possible.
Do you do small jobs, or only big projects?
Both. A single socket move is just as welcome as a full rewire. If we can't fit it in soon, we'll be upfront about timing.
Local to Fleet, working across Hampshire
Need a domestic electrician?
Call or email for a free, no-obligation quote. Email photos if it's easier — often the quickest way to an indicative price.